Common Problems With Hydraulic Presses Machine And To Fix Them

Common Problems With Hydraulic Presses Machine And To Fix Them

Once you have invested in a hydraulic presses machine, the next thing that comes, you need to deal with is maintaining it in perfect condition. But like any other machine, press equipment is likely to develop problems. That’s expected as long as the machine is working. Good hydraulic presses manufacturers will provide you with common problems and ways to fix them.

If you’ve invested in these machines for the first time, this list contains common problems you are likely to find with these machines. They include:

Annoying Noise

When you started using the machine for the first time, you will notice that the machine is operating silently. But with time, you might start experiencing some noises coming from any part of the machine. This should be taken seriously because the machine should operate silently. In most cases, the noise is created by loose parts in the machine. So, you need to have an expert check the machine to establish the loose parts and fix them. Note that persistent noise is a sign of wear and tear.

Nasty Vibrations

Another big problem with hydraulic presses machines is the vibration. This is a very common problem that happens when the machine is starting to wear out. Almost every machine will develop this problem, but you need to know how to deal with it. In fact, this is one of the problems that you must deal with immediately. In most cases, vibration is caused by loose parts or worn out parts. Most hydraulic presses manufacturers will provide you with a list of areas to check in case of this problem.

Reduced Force

Another problem common with hydraulic presses is reduced machine press force. If the machine is not pressing as expected, then you will have a problem with the quality of the products you will be producing. The problem is usually caused by a number of things, including the reduced pressure fluid levels. The motor creating the force at the other end could also be a problem. Hire an expert to help fix the problem.

Deform Work Pieces

The problem of the deformed work piece is caused by a number of things. First, there could be problems with force applied to the blank. The second problem could be the mold you are using. These are problems that you might need the help of a hydraulic press expert to fix.

Leave a Reply

Your email address will not be published. Required fields are marked *